The crying guy talking about tires and suspension. You could just listen… it might be easier than installing a 1UZ.
It’s fall. I missed the last weekend of driving by blowing a hard coolant line on a night run. I guess my soldering skills weren’t up to task, but I’m pretty confident that my ability to gob on JB-Weld is. I am now completely leak free and driving dry for the first time all year. I guess it was a […]
Now What?
Having a booster masks how much the bulkhead actually flexes when you put real pressure on the brake pedal. Without a booster every stop takes as much leg work as any stop would with a booster equipped, and given that, you really notice how much the bulkhead flexes and the master cylinder twists. It can be gross. So I built […]
Boosterless Brakes Continued
2 Grainy. Distributor relocation or DLI kits are typically the most expensive or hack part of 20V swaps… and from the engine’s standpoint this is neither. It sure is hack from the chassis point of view… but I’ve already cut and welded and braced my chassis so much that this seemed entirely trivial. Total cost was like $7 worth of sheet […]
20V Auxillaries PT@ – Ignition
There have been some niggles. 1. Wire RSO had a loose connection at the ECU plug, occasionally tripping a code 33 CEL, preventing the idle speed control valve from closing, and causing a high idle. 2. 195/60 Azenis are way bigger than the 185/60 Dunlop’s of 2010. Fender massage and zip tie work has been needed to minimize rubbing, although […]
You must be logged in to post a comment.